You already know how stable and strong an Uncle Seam embroidery machine is if you ever make things with it. But it also needs regular care in order to work at its best. The right care can save you time, money, and stress whether you have a small needlework business or sew at home.

Here are seven easy but important ways to keep your Uncle Seam machine in good shape. These steps will help it last longer, stitch better, and break down less often.

1. Turn Off The Power Before Cleaning.
   To unplug and turn the machine off before you clean or check anything is always very important. This keeps fragile parts from getting broken. Static electricity or pressing a button by mistake can lead to big problems. Do it every time, even for quick clean-ups.
2. Regularly Clean up the Dust and Lint.
   Embroidery machines gather a lot of dust and thread lint, especially after long runs. These tiny particles cling to the needle, the bobbin case, and the feed dogs, causing your stitches to appear unkempt and unnatural.
   To clean the surface and tight spots, use a very soft brush or a small handheld cleaner. Don’t use canned air, as it will push the dirt deeper inside instead of getting rid of it. Pay attention to the bobbin box, the thread path, and the needle plate.
   Tip: Clean your machine every 8 to 10 hours.
3. Check and Replace Needles Often.
   No doubt needles play a key role in stitching. But worn-out or bent needles can make stitching very bad, cause thread to break, or even damage the machine parts. It’s time to check the needle if you see skipped stitches or hear strange sounds.

Get a new needle:

• If it hits a hoop or hard surface after every big project,
• When you change the type of cloth,
• It’s also very important to use the right needle size and type.

For suggestions on needles, look at the instructions that came with your Uncle Seam machine.

• Use Oil According to Given Instructions.
  Some sewing machines need to be oiled, while others don’t. Most of the time, Uncle Seam machines only need oil in certain places, like the hook race or rotary hook.
  Only use the oil that comes with your sewing machine, and don’t put too much oil in it. Most of the time, one drop is enough. When you use too much oil, it can bring in more dust and gum up your parts. These small steps keep your machine quiet and running well.
  

• Clean Thread Path and Tension Discs.

Dirty or stuck-together tension discs often cause thread tension issues. Threads leave behind small fibres or residue that get in the way of the thread’s flow over time.

To clean them:

• Bring the presser foot up. This will make the tension discs open.
• Slide a thick piece of thread or dental floss that hasn’t been waxed through the discs slowly.
• Do it again and again until it’s clean.

Also, use a lint-free cloth to clean the thread path and guides. So, the tension is even, and the thread doesn’t break as often.

• Look Over Your Bobbin Case and Hook Area.
  The bobbin case and the hook device that goes around it are what make stitching possible. Dirt or stray threads could cling to this area, disrupting both your time and the machine.
  Take off the bobbin case and clean the area below it. Get rid of any lint or thread bits with your brush. If the bobbin on your Uncle Seam machine drops in, take out the needle plate to clean it better.
  Tip: Always use the right size bobbin and good thread. It takes more work to clean cheap thread because it sheds more lint.
  
• Put A Cover On Your Machine When It’s Not In Use.
  You worked hard to clean your machine. Now it’s time to keep it safe. Even a simple cloth dust cover will protect your Uncle Seam sewing machine from dust, pet hair, and water in the air.
  Do not put it near windows, bathrooms, or places that are damp. Over time, direct sunlight and steam can hurt the finish and circuits of your machine.
  A machine that is covered is one that works better and lasts longer.

Final Thoughts
You don’t need any special kind of tools or a lot of technical know-how to take care of your Uncle Seam sewing machine. It’s quite helpful to give it some care after every few days.
A well-maintained machine will always provide you with excellent work, increased efficiency, and a sense of peace of mind.
Happy stitching!